We talk a lot about enshittification of technology, so tell me about technology that is getting better!

I personally love the progress of electric scooters. I’ve been zooming around on a 400$ escooter for a year and it works so well. It has a range of around 20 miles and top speed of 15 mph, so it works just super well for my uses, and 10 years ago scooters with that range/speed/price were no where near a thing.

  • superkret@feddit.org
    link
    fedilink
    arrow-up
    182
    arrow-down
    6
    ·
    edit-2
    4 months ago

    I know, I know, it’s getting boring, but…Linux.
    Nowadays you install it by clicking “next” a few times, and when you’re done, the latest updates are already installed, the firmware for your hardware is installed, your wifi is connected, your networked printer/scanner combo is already recognized and set up, storage media or devices you plug in are auto-mounted, most games work out of the box, bluetooth works, MS Office files can be opened without becoming a garbled mess, touch screens work, touchpads work better than on Windows, …

    It didn’t used to be this way. 20 years ago, Linux ran only on desktop PCs with Ethernet cable connection, all games had a penguin as the main character, shopping for a printer made salesmen look at you like you’re from Mars, and when someone sent you a .doc file, you sent back a reply to please use a free format or PDF.

    • neidu2@feddit.nl
      link
      fedilink
      arrow-up
      11
      ·
      edit-2
      4 months ago

      I wholeheartedly agree with you, but today I feel like ranting about the debian 12 installer a bit and its inability to accept that, yes, I do in fact want to install grub on two separate hard drives at once, so that I have two sets of /boot/EFI

      The OS itself allows installation on mdraid, but grub does not. So in the end I had to set up one /boot/EFI partition on one drive, and reserve an identically sized partition on the other drive so I could manually duplicate the grub installation afterwards. Took me a few hours of hair pulling and way too much coffee to figure that one out.

        • neidu2@feddit.nl
          link
          fedilink
          arrow-up
          9
          arrow-down
          1
          ·
          4 months ago

          I haven’t used a windows installer in a decade, so no. Does windows even allow basic partition8ng during install?

          • bobs_monkey@lemm.ee
            link
            fedilink
            arrow-up
            8
            ·
            4 months ago

            Basic, yes. But windows still assumes it knows better than you and does whatever it wants anyway. But you can set up separate partitions for C:\ and D:, etc

    • Toribor@corndog.social
      link
      fedilink
      English
      arrow-up
      5
      ·
      4 months ago

      Linux has been easier to install than Windows for a while now, particularly with all the goofy hacks you have to pull out just to make an offline account on Win11.

    • christophski@feddit.uk
      link
      fedilink
      English
      arrow-up
      3
      ·
      4 months ago

      I just used Virtualbox’s auto install feature yesterday and it was insane. Literally just put in name and password and iso and it did the rest.

  • ProdigalFrog@slrpnk.net
    link
    fedilink
    English
    arrow-up
    150
    arrow-down
    3
    ·
    4 months ago

    Open source software in general. Seeing Blender become an industry standard was awesome, and it looks like the Godot engine may do the same for gaming. Krita has evolved into a truly wonderful painting program (and not half bad as a Photoshop replacement), and Linux itself has come so far, having become a genuine gaming platform.

    Quite happy about all of that. :)

    • ECB@feddit.org
      link
      fedilink
      arrow-up
      18
      ·
      4 months ago

      It’s been years since I had to deal with MATLAB licenses, since basically everything in scientific computing/data science uses Python these days!

  • sgibson5150@slrpnk.net
    link
    fedilink
    arrow-up
    135
    ·
    4 months ago

    Active noise cancellation. It’s a bit like magic. Don’t be a wanker and say “Um actually, all you have to do is emit an inverse waveform.” I think it took a hell of a lot of work to get this right, especially integrating it into relatively inexpensive consumer devices. Thanks, scientists and engineers. Well done.

      • Rai@lemmy.dbzer0.com
        link
        fedilink
        arrow-up
        29
        ·
        4 months ago

        I bought AirBudz pros to delete an annoying coworker and when I first had my partner try them, they were like “HOW DID YOU TURN OFF ALL THE FANS”

      • SoGrumpy@lemmy.ml
        link
        fedilink
        arrow-up
        16
        ·
        4 months ago

        I need hearing aids. My aids are so small they fit completely in my ear, so unless you are standing up close, you can’t see they are in. I’ve had them for about 3 years and I’m still blown away how small they are and how well they help me.

    • ColeSloth@discuss.tchncs.de
      link
      fedilink
      arrow-up
      11
      ·
      4 months ago

      I think the concept was old and fully grasped. Reducing the latency enough to make it work in headphones and earbuds was the magic part.

  • socialhope@lemm.ee
    link
    fedilink
    English
    arrow-up
    79
    arrow-down
    2
    ·
    4 months ago

    This will sound a little mundane but, FLASHLIGHTS! Particularly bicycle head lights. The prices before LED’s were just STUPID. Hundreds of dollars for small amounts of light (which to be fair was the best you could get at the moment). Which were being used for night mountain biking. But all I needed was to get to and from work safely at night, I didnt have $400 for a headlight that would actually let me see the ground in front of me.

    BUT, then came the revolution. China started putting out these LED lights that blew everything else out of the water … FOR CHEAP! In two years light prices went from $400 to $100 for top of the line lighting. US bike light companies were a year or two out before they could re-tool to match the lumens coming out of china. Mind you, the Chinese lights were not always the most reliable. BUT they were 1/4th the cost of a name brand light. So even if it died, you could still buy ANOTHER one for less than the price of a high end name brand light.

    And since the LED revolution, things have not changed much. Prices either go down or stay the same and the lumens increase OR the burn time increases. Its just a win win for customers/consumers.

    • eightpix@lemmy.world
      link
      fedilink
      arrow-up
      20
      ·
      4 months ago

      By the same token, and I consider these a different category, headlamps. Camping got a whole lot better with a solid headlamp setup. The red light is crucial.

    • sbv@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      13
      ·
      4 months ago

      I hadn’t thought of that, but you’re right. When I was growing up, incandescent bulbs and massive short-lived batteries made flashlights suck. Now flashlights are tiny, throw a tonne of light, and last a really long time.

    • selokichtli@lemmy.ml
      link
      fedilink
      arrow-up
      9
      ·
      4 months ago

      I have an obsession with light. Love the golden and blue hours and I don’t want to know why, it’s just so beautiful to watch. Being like this I’m pretty conscious of lighting and, in general, it has become just wonderful to have that precise dim and warmth in every space for a reasonable price. Not only this, less-intrusive lighting had become something urban ecologists quietly succeeded on spreading all over the world (bat-friendly lighting, for example) thanks to the available technologies.

      So, yeah… not mundane at all.

    • Trainguyrom@reddthat.com
      link
      fedilink
      English
      arrow-up
      2
      ·
      4 months ago

      I’ve been biking at sunset after I get the kids to bed and have super cheap lights on my bike to blink for visibility. Each light is powered by 2 CR2032s (BIOS batteries) I forgot to turn them off one day after my ride recently and left it in the garage blinking away, came back the next day to no visible decline in light output after running them for over 24 hours. Honestly those lights are probably approaching 24 hours of actual usage time not counting leaving it blinking in the garage

  • tibi@lemmy.world
    link
    fedilink
    arrow-up
    72
    ·
    4 months ago

    Lights. 15 years ago, everyone was using incandescent bulbs which were terribly inefficient and neon lights which had their own inconveniences. Today, LEDs have mostly replaced them, can produce better quality light, and use a fraction of the power.

    • golli@lemm.ee
      link
      fedilink
      arrow-up
      18
      arrow-down
      1
      ·
      4 months ago

      Agreed. I remember when lightbulbs got banned here in the EU starting from 2009 to 2012 in steps. Here in Germany plenty of people were mad and hoarding them.

      Nowadays with the larger focus on energy prices, especially in light of the russia-ukraine war, it seems insane that not even that long ago to light a room one or multiple lightbulbs using 65-100 watts were used. That’s like the equivalent of an office PC running just for some light.

    • wuphysics87@lemmy.ml
      link
      fedilink
      arrow-up
      7
      ·
      4 months ago

      And they run cool. My office has a fixture that was too bright which would normally take those 4’ fluorescent bulbs.

      I got on a ladder take one out. Turns out they were LEDs. Cool to the touch. I put electrical tape over them and called it a day.

    • My Good Sir@lemmy.ml
      link
      fedilink
      English
      arrow-up
      8
      arrow-down
      2
      ·
      4 months ago

      Only downside is people abusing the lack of headlight & bumper height regulations

    • NauticalNoodle@lemmy.ml
      link
      fedilink
      arrow-up
      5
      ·
      edit-2
      4 months ago

      I miss real neon. but I like that hydroponic grow-lights now only use as much power as a 60-120watt incandescent bulb. I remember when those big metal hallide & sodium lamp setups were a huge barrier-to-entry for indoor growing.

  • Nefara@lemmy.world
    link
    fedilink
    arrow-up
    57
    ·
    4 months ago

    I’m excited to see the progress of 3d printers becoming more user friendly, reliable and inexpensive. I’ve been keeping an eye on the development of consumer printing and there are so many types of materials to print with at higher and higher details with less troubleshooting needed. I’m thinking I’ll finally jump in this year but I’ve had very little time for hobbies lately.

    • agamemnonymous@sh.itjust.works
      link
      fedilink
      arrow-up
      9
      ·
      edit-2
      4 months ago

      I’ve been following 3d printing since the early 2000s, when it was all homemade machines printing with weed whacker line, slicers weren’t a thing, and resolution was garbage. Now I have a reason printer that cranks out tiny detailed tabletop miniatures no problem. What a time to be alive.

      • ᗪᗩᗰᑎ@lemmy.ml
        link
        fedilink
        arrow-up
        1
        ·
        4 months ago

        what model do you have if you don’t mind me asking? curious what’s out there working for people from someone who would like to get into it but just hasn’t (nor looked into it very much)

        • agamemnonymous@sh.itjust.works
          link
          fedilink
          arrow-up
          3
          ·
          4 months ago

          I’m still using an Creality Ender 3 for FDM because it was cheap and does the job, but a lot of great FDM printers have come out in the past few years at competitive price points. I use this for larger items where fine detail isn’t important (tabletop buildings, terrain, vehicles, large creatures, etc)

          For resin I’ve got an Elegoo Mars 3 Pro, but anything 4k is going to give pretty good results. Keep in mind though, resin is more involved than FDM. You’ll need gloves and a VOC respirator to handle fresh prints, and I sprung for the wash/cure station to make my life easier. I use this for small prints with thin parts or fine details (character minis mostly).

          FDM is where most people start to get their bearings, but if your use case is exclusively small detailed prints, it may be worth it to jump straight into resin. Just prepare for a slightly steeper learning curve.

    • Kom@aussie.zone
      link
      fedilink
      arrow-up
      6
      ·
      4 months ago

      I recently purchased a bambu labs p1s after many years of fighting with an Ender 3. I’ve printed so many things and not had a single fail, it prints so fast I actually don’t know what to do next… The AMS also opens up a whole new world, I’ve printed book marks (I know it sounds silly) but these things look amazing, something I never would have thought of ever. My only gripe is not having all the filament colours I want due to cost haha.

    • totallynotaspy@fedia.io
      link
      fedilink
      arrow-up
      4
      ·
      4 months ago

      Yes! I grew up with Warhammer, and I can’t tell you how many times as a teen I wished I could just make my own minis, or print something specific to add on while kitbashing.

      Fast forward to today and I have a resin printer, unfortunately my free time is a bit less than it was 20 years ago so it doesn’t see as much use as I’d like. God I feel old.

  • ShittyBeatlesFCPres@lemmy.world
    link
    fedilink
    English
    arrow-up
    50
    ·
    4 months ago

    Medical things, mostly. Everyone experienced the speed that mRNA vaccines can be developed and deployed at scale. A lot is coming from that tech. One of the objectively good uses of AI is protein folding and discovering new compounds. Just being able to target a virus’s weak point is so new, stupid people are freaked out by it.

    Consumer tech stuff like batteries and whatever the hype cycle is promoting — crypto or LLMs — gets all the attention but the life sciences field marches on. There are things that are going to revolutionize the way we think about certain diseases. In my lifetime, AIDS went from death sentence to something more like expensive diabetes.

    And with emergency care, there are things that even an ER doctor with $200,000 in equipment can only hope to triage today that will be something an EMT can begin to triage on the way to the hospital with something simple. (NARCAN exists now but it’s an example of slow and steady progress. Imagine a NARCAN for heart attack or stroke where we just keep it in our first aid kits.)

    • ColeSloth@discuss.tchncs.de
      link
      fedilink
      arrow-up
      11
      ·
      4 months ago

      I’ve been an EMT for over 15 years. It’s now common place that ambulances carry battery powered devices that do cpr compressions for you. The things are incredible, really. Freeing up a person from needing to do it, no longer worrying about fatigue, and not having an extra person to do compressions in the way of moving around the patient is just fantastic.

        • ColeSloth@discuss.tchncs.de
          link
          fedilink
          arrow-up
          1
          ·
          4 months ago

          The Lucas looks more Sci fi, but usage wise, I prefer one called AutoPulse. It looks less “brutal” when being used in front of patients family/bystanders, isn’t as loud, and the newer ones have a built in tarp with straps to pick up the patient and carry them so the stretcher. Also has a much lower profile.

          • ericbomb@lemmy.worldOP
            link
            fedilink
            arrow-up
            4
            ·
            4 months ago

            Ooh watched an AutoPulse one!

            AutoPulse looks almost Star Trek. Very sleek and usable. It looks so unassuming when they pull it out, then it makes that chest COMPRESS. I’m aware that you have to press hard enough to get the ribcage moving, but I was not prepared for such an unassuming device to have that much force. I can see them slipping a vest onto someone in star trek that pumps their heart and helps carry them to sick bay.

            Lucas is more star wars. It looks like a rib cracker.

            So I think I’d prefer an auto pulse XD

  • FlashMobOfOne@lemmy.world
    link
    fedilink
    arrow-up
    49
    ·
    4 months ago

    E-books

    I love having the physical thing in my hands, but love that we’ve gotten to a point where I can log on to Libby and just download one too, or back up digital versions of my favorites on my hard drive so I hopefully never lose them.