I have a titanium wedding ring. I quit wearing it as it is softer than steel. It was getting pretty scratched up from working and weight lifting. They must be thinking of a different alloy like tungsten or high carbon steel, etc.
Or you got scammed
Or metals can have a lot of different hardnesses based on alloy composition and treatment.
https://steelcalculator.app/reference/steel-hardness-chart/
https://matmake.com/properties/hardness-of-titanium-alloys.html
Long story short of that chart, steel can be a wide range of hardnesses that extends beyond titanium’s capacity in both directions
So they’re saying just go straight to the firestation if it gets stuck.
I’ve seen this post before and I’m going to comment the same thing again in this one.
I’ve worked at three different departments and volunteered at another over the past nearly 20 years. None of them have owned a diamond cutter little Dremel tool or anything. We have no way to cut off a titanium cock ring without the dick going right on with it.
The hospital (and some fire departments I’m sure) do make them. They exist as purpose made ring cutters and as just diamond Dremel blades. We just don’t have them.
Seems odd that a hospital would have damn near every medical device known to humankind, but not a $10 pack of diamond cutoff wheels for a Dremel.
Some hospitals are small, but I’d still be inclined to agree. Don’t believe everything you read on the internet.
Also. They get stuck because the blood can’t drain back out from where it came from. Well hospitals tend to have needles and do blood draws…
My ex-wife was a scrub tech and later a nurse in surgery. The two biggest hospitals would pay a cab to transport borrowed surgical tools back and forth. This was before Uber and the like, so more expensive than it sounds. Not talking about high-end electronics, talking about hand tools.
I was floored at the inefficiency. She said it was perfectly normal.
Probably a hot-shot driver and not a cab.
My Dad was a hot-shot for a while. My favorite run he got was a 2am call to deliver a very specific o-ring from a warehouse in Houston to an industrial site near Corpus. Apparently every second that machine was down was costing a fuckton and they needed that o-ring and the fastest way to get it was to just hire a dude close to the source of the part rfn.
That o-ring ened up costing nearly 2 grand.
I’m shocked at the inefficiency of not having spares of things that are relatively cheap compared to the cost of downtime. If downtime is that expensive, you can probably afford to have a maintenance warehouse if even that is necessary.
I do wear stainless steel finger rings but I’m a little freak who can’t handle a ring being tight so I wear them so loose they fall off randomly anyway.
Who needs the fire department? Call the guy’s mother. When she walks into the room then you’ll hear a clanking sound when the object hits the floor due to rapid contraction.
But don’t make the mistake of calling his stepmother.
I know it can’t be this easy, but couldn’t they just like… Lance it? Would that help the swelling go down?
The gauge of the needle needed to do so can do more damage than other options.
(don’t) look up compartment syndrome, which is a very similar situation. They literally have to slice open your legs to let the pressure out.
I’m thankful I’m on ADHD meds because otherwise I wouldn’t have the impulse control to not look that up.
Wouldn’t it be easier to remove the penis, take of the ring and reattach the penis? Doctor could do it without calling the fire department and creating an embarrassing situation.
Yeah, just remove it. There are so many options to replace it later, and it really shouldn’t be too difficult to replace the batteries in those…
Maybe just leave the penis off, so it doesn’t accidentally happen again?
King
crimsonmissile has entered the chatIt’s better to have a dismountable penis. That rocks!
If we want to leave it off than diamond saw could actually be a good option.
That dude is wayyyyyy too chill about having to barter for his wang back
I wonder if keeping it on a chain, like a wallet, would work as a middle ground. Hook it through the Prince Albert ring
I work at a tech school, we once had a group from the fire dept come in for a similar reason (they didn’t have the proper tools to remove a titanium ring from a finger). We joked the whole time about cutting off a dong ring. I think I would do it but we had to spray water on the guys hand so it would definitely be a messy job. And a lot of people would be involved.
I can’t understand this need. My own one is far too variable in size and I’m rather old.
Different strokes for different folks of course but the raging hard on and extended release that cockrings permit can be quite fun.
Probably TMI Explanation
Personally, I have the challenge of a combination of factors
- my wife exclusively cums through penetration
- I am intensely aroused by my partner’s arousal (sometimes I swear it’s basically 1:1)
- the best way to bring my wife to orgasm is through sustained extremely vigorous penetration
So the end result is, without something to delay my own orgasm (alcohol, gummies, numming lube or a cockring), she gets left unsatisfied
Very lucky for you! I’ve only had one lover like that and making her cum was hilariously easy. One night I set her off 8 times for giggles. Pictured: Me looking at her passed out

It’s a nice feeling for both partner. It gives me a primal raw feeling for whatever reason and my partner likes it because its harder.
You can buy rubber/silicone one or some that you can adjust. No need to trap your junk in a metal ring.
How would you get a small cylinder (5.1 inches in length, ~4.5in girth) unstuck from a mini M&Ms tube filled with butter and microwaved mashed banana?

The cylinder must stay unharmed!
Nobody mentions the guy buying 15 stacks of butter. The fuckin algorithm tho,
His wife is making butter dogs.

Butter dogs are a lot more expensive than hot dogs
Dammit I was barely into a Pratchett novel
In the Great Hall, under the carved or painted stares of two hundred earlier Archchancellors, the butler’s staff set out the long tables and benches. In the vaulted maze of the kitchens—well, the imagination should need no assistance. It should include lots of grease and heat and shouting, vats of caviar, whole roast oxen, strings of sausages like paperchains strung from wall to wall, the head chef himself at work in one of the cold rooms putting the finishing touches to a model of the University carved for some inexplicable reason out of butter. He kept doing this every time there was a feast—butter swans, butter buildings, whole rancid greasy yellow menageries—and he enjoyed it so much no one had the heart to tell him to stop.
Perfect for clogging both ateries and intestines.
And the pipes. *shudders*
cast saw
MY GOD IT’S SPREADING OFF OF REDDIT
Flood the cylinder with canola oil
Is the cylinder important or could you for example, cut the tube open?
It is imperative that the cylinder remains unharmed.
What a coincidence, “A Very Undesired Experience For Everyone Involved” is the title of my biography.
What a coincidence, “A Very Undesired Experience For Everyone Involved” is the title of my pornography.
Judging from the fire fighters I know I’d say they’d love every minute of it
FF1: now stay very still, this is a delicate procedure
FF2: * starts circular saw nearby, out of view of the patient *
I guarantee it will become legendary around the firehouse.
“Welcome home, honey! How was work?”
“Oh, the usual!”
Typical day. “Oh, just some terrorists decided to send a little care package. Box of goodies. Which had to be neutralized before blowing up the office…”

Just stand inside a walk-in freezer for a few minutes.
Really? Can you just apply an ice pack or do you actually have to find a walk in?
The embarrassment of having to talk to a restaurant chef on why you are naked with a raging boner is what the actual help is here
Having worked in restaurants for 15 years we just call this Tuesday night
I thought a titanium ring would shatter if you try to cut it. It’s more brittle than steel, no?
That is the tungsten rings. Tungsten rings shatter.
Titanium work hardens if you don’t get your feed and speed just right. If that happens your tool gets insta-dulled and you need to scrap (or sharpen) the cutting bit/blade cuz it ain’t cutting no more. You also need to start a new cut somewhere else and hope you get it right this time.
I mean if your tool gets insta-dulled it sounds like problem solved.
Titanium is pretty ductile, you’re probably thinking of tungsten-carbide rings.
https://en.wikipedia.org/wiki/Tungsten_carbide#Jewelry
https://www.aemmetal.com/news/tungsten-carbide-vs-titanium.html
They do something similar with tungsten wedding rings, but generally speaking they crack them with vice grips.
Neat! Never seen vice grips with the twisty bit.
I think titanium will deform too much before shattering. But I had a tungsten finger ring once that was designed to shatter to avoid exactly that
Say no more










