• tyler@programming.dev
    link
    fedilink
    arrow-up
    64
    ·
    4 months ago

    The power can go through the female end just fine, that’s not the problem. The problem is people plug this “suicide cable” into the wall first, thus creating a 120v taser of sorts. Like someone else in this thread said, the only problem from cables like that is people tend to try to backfeed energy into the system with a generator or solar panels. Boom.

    • fraksken@infosec.pub
      link
      fedilink
      arrow-up
      42
      ·
      4 months ago

      Also, at the end of the chain there is a male terminal exposed with live current. Could cause a fire I guess.

    • RisingSwell@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      5
      arrow-down
      1
      ·
      4 months ago

      So is the problem solved by not plugging it into a powered wall plug? Just like… flick the switch off, like you would a light switch before changing a bulb?

        • RisingSwell@lemmy.dbzer0.com
          link
          fedilink
          arrow-up
          2
          ·
          4 months ago

          Wait really? I don’t think I have a single unswitched plug in my house, and I’ve never seen another house with even a single unswitched plug. Do US people need to unplug cords to get rid of standby lights?

          • Captain Aggravated@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            3
            ·
            edit-2
            4 months ago

            Behold the typical North American duplex power outlet. They typically do not have a built in switch. They might be controlled by a light switch, so you can throw a switch near the door and have the floor lamps turn on but most are always hot.

              • Captain Aggravated@sh.itjust.works
                link
                fedilink
                English
                arrow-up
                4
                ·
                4 months ago

                Technically yes, as do those switches internally, but if the device you’re plugging in is switched off or pulls a very small load it won’t be much. If you’re plugging in an air conditioner or something that’s going to present a big inductive load, and it is switched on so it will get power the instant it plugs in, yeah you might see a little flash of light. make sure such things are switched off before plugging them in.

      • bjorney@lemmy.ca
        link
        fedilink
        arrow-up
        6
        ·
        4 months ago

        Yes, but if someone trips over the cord there is a 50% chance the wrong side comes unplugged and potentially kills them, hence why they don’t make these cords