One of the environmental regulations we benefit from here in the us, is eu common charger rules! Basically all computer like devices now use usb-c. Thanks.
But it would be even better to be common to essentially every portable device. I’ve seen flashlights that charge over usb-c.
While I was travelling this past weekend, my toothbrush battery died and I didn’t have the proprietary charging base. I sure wish that took usb-c also. Looking online I see a couple but most electronic toothbrushes still use proprietary chargers
Which brings up: what are you guys seeing, where common charger rules are actually required? Looking across non-computer devices that are not required to be usb-c, are they?
Edit: proprietary
Logical things I think it could or should become the norm as well: electric razors, vaporisers, head-flashlights (like Petzl), many kinds of toys like RC cars and such, christmas lights, Halloween decorations etc etc.
It think in many cases it will usually be a lot more ecological to use devices you already own as long as you can and keep repairing them if possible. It’s nice to have usb-c, but throwing out a fine, still functioning toothbrush to replace it by a usb-c chargeable model just for that reason seems to me like the opposite of ecological.
In that case its not being thrown out simply because its not usb c, its being thrown out because they lost/damaged/donthaveforwhateverreason the actual power supply.
Ive got a whole range of useless electric stuff that I don’t have the power supply for but cant bring myself to throw away
Yes.
More and more common personal things are being electronised - toothbrushes, shavers/razors, water picks, just to name a few from the bathroom, but there’s also the tons of various nightstand bits, kitchen utilities (I actually have a handheld stick blender/whisk that uses USB-C, as well as a milk frother), the list goes on.
If it’s a low power device (sub-100W charging/supply), USB-C should be mandatory for it.
Yes I know USB-C can now do 240W but it’s not widespread yet and people would be annoyed by the fact their €5 10W charging brick can’t make their 200W thingie work.
Thinking more broadly than just portable devices, EVs seems like an obvious candidate for harmonization. I’m aware that the industry is still settling, but perhaps a set of standard voltages that all charging stations could support and a protocol / interface for dynamic charger / vehicle voltage negotiation wouldn’t go amiss.
I’m not really in the know but isn’t that already a thing? I’m pretty sure it is.
I looked into it, and apparently EV chargers in the EU are supposed to comply with EN ISO 15118-1 to -5 series of standards from January 8, 2026 and additionally EN ISO 15118-20 from January 1, 2027. I haven’t exactly had the chance to read all of those obviously, but the summary certainly sounds encouraging:
These standards are the central basis for future-oriented functions such as “Plug & Charge”, secure communication between vehicle and charging point and bidirectional charging (vehicle-to-grid).
Oh ok. I have no idea what the situation here is for bidirectional charging. It’s not common yet.
And yes, we’re trying to work out common payment systems, but as far as I know, that’s just software. Historically chargers required you to register and pay through the manufacturers app, but that’s unscalable when you have many possible charger manufacturers supporting a common standard.
One of the requirements for US incentives to build out chargers was mandating credit card readers so anyone can drive up and charge without a proprietary app. Of course that was cancelled in our chaotic political situation, so will take more years to happen
Here’s hoping you guys will eventually manage to work it all out, even if that will likely have to await a more, um… rational policy regime.
Rational … hahahahahahahahahhehehe hoo hohoho hah haha hah hah hahahahahah aha haha. Sorry, where were we again?
I think we were having a shared nervous breakdown over the current state of geopolitics, but the hyperventilation made me lose consciousness so I can’t be sure.
I would like to charge my bike battery on both usb-c and at ev stations
There are still plenty of non-C gadgets, but I can see a trend that people want USB-C more and more.
I was just shopping for some rechargable flashlights and it was a common thing to see reviews mentioning the lack of USB-C as a negative in reviews.
I have a humidifier and air purifiers that are powered via USB-C. Sadly, my dehumidifier has a different connection.
I sure wish my AirHog drone could be charged with USB C and not whatever super teeny tiny thing it actually uses. I lost the charger for it because it is so small and I also have no idea what kind of charger it is to see if a replacemrnt is cheaper than buying a new drone.
I’m already looking for USB-powered devices for stuff like electric razors and flashlights. Check out Wurkkos for example.
With toothbrushes the problem is seemingly the duopoly. If there is a good USB-chargeable alternative to Oral-B, please let me know.
I avoid non-usb-c like the plague.
It’s also very unusual to still find newer stuff still using micro-usb(3.0).
Most stuff ships with usb-c by default except for stuff like microcontrollers like ESP32 and similar stuff.Most of new consumer-grade devices are USB-C while non-consumer-grade ones would utilize other standards. But I haven’t seen a proprietary ones in a while here. The one I have for my miniPC is proprietary, but I am skilled enough to either fix it or change it for something else when it’s breaks.
I am all up for USB-C for personal/home electronics. I have modified some of my devices to utilize USB-C and am incredibly happy with results. But I also can see why say audio/video equipment would never adapt fully to USB-C. I guess industrial equipment does benefit from much sturdier connectors than USB-C and there are plenty of standards.
You can make your own pretty cheaply with a little electronics knowledge and tools
