Greetings! So recently, i spent a few hours coding software. After i was done and i shut off my pc, i noticed both of the ethernet lights were on and blinking. Does this mean that Microsoft is sending data to their servers before the PC fully shuts off? I am scared that this might be the thing it does. How can i get rid of this issue? I have no idea if it’s related to Windows or the PC itself.

  • ReversalHatchery@beehaw.orgEnglish
    5·
    4 months ago

    Also it is not great practice to totally shutdown at night as that’s the time when update happen.

    updates can be installed when it’s turned on, though, and it well consume much less power.

    It also could theoretically wear out hardware but chances are that’s not a problem on newer machines

    what do you mean? I don’t understand.
    if you mean the HDDs spinning down and up, then

    • if it only happens at shutdown, it shouldn’t wear them out, additionally as I know HDDs (consumer models at least) don’t like endless spinning either
    • windows probably shuts it down regularly when it’s not in use. this is a setting in the power profile
    • as I know, frequent spindowns only increase wear out if it happens very often, like every 10 seconds and such because of the drive’s garbage internal power saving setting. that’s why I always keep it at least 30 minutes or more
    • Possibly linux@lemmy.zipEnglish
      1·
      4 months ago

      I’ve never seen hardware die because of repeated shutdowns. Also most people aren’t running HDDs these days as flash storage is cheap and plentiful.

      For updates you need to be turned on for them to install. That’s why shutting it down isn’t good practice. Just set a maintenance window and put the computer to sleep.

      • ReversalHatchery@beehaw.orgEnglish
        1·
        3 months ago

        I’ve never seen hardware die because of repeated shutdowns

        then why do you recommend to keep the computer on for a longer life?

        but in the case of hard drives, this is a real thing, just not at that scale of shutdowns. if you don’t find sources on this let me know and I’ll show some.

        For updates you need to be turned on for them to install. That’s why shutting it down isn’t good practice. Just set a maintenance window and put the computer to sleep.

        of course, the installation will get prepared while the computer in on. it will have plenty of time being turned on.
        but most updates, including a lot of security updates only apply when restarting the updated software, like shutting down the operating system.