I have never homelabbed, and this is going to be my first experience. I want to set up a home server. My current goals are to set up a gallery using Immich, an ad blocker/DNS using Pi-hole, and a cloud service.
I want you to suggest what second-hand PC or laptop I should get. I researched a bit and found out that a PC is better because of 24/7 reliability, better cooling, no risk of laptop battery swelling, easy RAM and storage expandability, and low idle power consumption.
What I think the specs should be for me is 12 GB RAM and 256 GB storage. And my budget is 10k INR.
I want to hear your thoughts. Thank you! :)
Lenovo T-series is generally a good pick whenever you want to run Linux.
I’d say the same for their USFF and SFF form factors as well. Great systems for homelabs, I have several (and my laptop is a T495, and my son has my old T470s).
Problem with laptops and (u)SFFs is storage capability. If you want a NAS you need some sort of external JBOD or you will be limited to 1-2 storage disks (and possibly have to boot I.e. truenas from USB).
If you can find them with a PCIe slot (or extra m.2 slot that exposes 4 lanes at least), you should be able to get a RAID card and rig up a way to use eSATA and some sort of external disk enclosure though.
Pay attention to performance/watt. Consider different boxes for different roles if you want…I.e. ZFS doesn’t need a lot of processing power, but it does like RAM. If you have a system that can use dirt-cheap DDR3(L) like a 6th or 7th gen Intel, that may be a better choice for NAS-only.
Then use a more powerful NUC or (u)sff for proxmox and run LXCs or VMs on it.
Get a NUC or one of those mini Lenovo things that show up in lots of homelab photos.
no risk of laptop battery swelling
This is wrong. Any device with a battery can swell.
Welcome to the hobby! It’ll consume your free time and (if you’re the right kind of person) deliver lots of satisfaction.
Cylindrical cells won’t swell up. They go open circuit if they start building up pressure.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters LXC Linux Containers NAS Network-Attached Storage NUC Next Unit of Computing brand of Intel small computers NVMe Non-Volatile Memory Express interface for mass storage NVR Network Video Recorder (generally for CCTV) PCIe Peripheral Component Interconnect Express PSU Power Supply Unit RAID Redundant Array of Independent Disks for mass storage SSD Solid State Drive mass storage ZFS Solaris/Linux filesystem focusing on data integrity
[Thread #161 for this comm, first seen 7th Nov 2026, 19:30] [FAQ] [Full list] [Contact] [Source code]
Some mini-PC’s have room for more than one SSD. Those are more future proof. You can start with one SSD, discover what kind of stuff you run, only containers, only VM’s, or a certain mix of those. You can always add a second SSD later — when your enclosure allows it.
Retired business or surveillance hardware is worth checking locally too. My two servers are repurposed NVRs running plain Ubuntu Server, and a Dell OptiPlex handles dev work. For that list, I’d start with the hardware you can get affordably and check its RAM capacity and drive connections before buying. Docker on plain Linux keeps things straightforward. With Immich, budget for a separate backup of the photos before it holds your only copy.
Whatever is available on your local secondhand market. Mini PCs are usually pretty good. Less standard parts though, same with brands like Dell, HP, Lenovo.
a PC is better because of 24/7 reliability, better cooling, no risk of laptop battery swelling, easy RAM and storage expandability, and low idle power consumption
On the other hand
- laptops are sometimes recommend due to the battery acting as a built-in UPS. That means the system should truly be reliable 24/7, even in the event of a power outage
- with that said, you want to ensure that whatever laptop model you’re looking at supports battery bypass charging so you don’t risk the battery swelling that you mentioned. When the battery is full while plugged in, if the laptop is still routing power through the battery, yeah, you risk swelling. But if the laptop is set up to pull power directly from the wall without going through the battery first (only switching to battery power in the event that it gets unplugged or whatever), it’s no different than a UPS battery
- some laptops cannot be upgraded at all, but memory/storage are the two most common upgrade paths for the many laptops that actually are able to be upgraded with standard SODIMM, NVMe, etc. Just make sure whatever laptop model you’re looking at can be upgraded
- laptops are specifically designed to have a low power consumption, so I’m not sure what that point is about. Unlike desktop PCs, which are supposed to be plugged into power 24/7, laptops are intended to be used on battery power most of the time, so they want to make them last as long as possible on battery power by optimizing power consumption through efficient chipsets and whatnot. So even if you use it plugged in, it should still use little energy compared to a desktop workstation
With that said
- a desktop will undoubtedly have better cooling. Laptop designers sure put a lot of effort into creating very smart cooling solutions that work very well, but physics is physics. Comparatively, desktops are larger and more open, leading to naturally better cooling
- if a laptop has upgradeable memory/storage, at best, it will probably only have two slots for each. On the other hand, with a desktop, you often have the ability to use four memory sticks and a dozen storage drives.
I usually get amazon renewed dell, hp Lenovo here in the States. Laptops usually just come down to specs. Though I usually see them for around $250-$300 usd so a bit over your budget but will depend on what you can find more local to you.
These mini enterprise PCs pack a big punch for their size for desktop options. Might be able to find some if a local IT company is dumping old inventory near you

Which part do you want to spend the least time maintaining: photo backups, remote access, or updates? I’m designing Doomsday Box, a home-server concept, and trying to understand what should work without constant attention. Your planned setup is relevant. Would you mind giving blunt feedback on the idea? https://heyeddi.com/projects/doomsday-box
I’m not sure where AMD started allowing PCI and USB VM hardware pass through. But Intel 7xxx and up allow for it. Which really opens up what you can do. I have a tiny HP business unit with a 7th gen i5, 8GB RAM, and 256GB nvme sans psu. I picked up for 60 bucks on eBay plus shipping and taxes. PSU was about 16 dollars.
Proxmox as a hypervisor, patching my zwave and ZigBee USB dongle through to HA. HA running on 2 core and 4GB. I passed the rest of the CPU, RAM, SSD, mouse, keyboard and display off to Haiku. For a nice graphical local admin console. I could easily split off more from haiku and get a 3rd setup running under proxmox. As haiku doesn’t necessarily need more than half a GB of RAM and 20 to 30 GB of disk space and 1 core really.
I bought myself an HP elitedesk G3 800, they come in three skews: mini, small form factor and tower.
I bought the tower. There is so much room. Look at the Elitedesk G4 800 because there you get 8 and 9th gen intel.
But I love mine, planning to put in three large HDD in her, already have two 2.5 SSD, I have been scouting ram and got relatively cheap second hand ram deals, with 32gb in the system. I am planning on getting the 7700t (the t variant is the low power draw version).
But the thing is quiet and can be upgraded but also just plonked on a desk and left to run no worries
I have a G3 600 I got recently. It’s a solid HA and haiku system running on top of proxmox.
I have a dell optiplex micro that has been running pretty much everything in my home lab. They sell for $100ish on Amazon and eBay.
IMHO RAM>CPU. Anything released in the past decade will kick ass if it has a good amount of RAM. I still game on a 2016 desktop PC.
EDIT: Please correct me if I am wrong, but 10,000k INR =~ $100. If that’s the budget, then I highly suggest an IBM ThinkCentre Tiny. They use to sell for ~$100 (used or refurbished). They have no moving parts and make for great headless units.
How much RAM would you recommend ? I only find ones with 8Go (DDR3 mostly) in the ~100€ price range which seems a bit low
Ugh. You could get the 16gb 256GB I5 model, refurbished, for $159 not so long ago. 8 is not awful if you run a minimal Debian 13 server, but 12+ is ideal.
The key is searching local IT clearance shops. Also, if you are entrepreneurial, ping your local banks to see if they are willing to sell their old ones. The prize is in the units that aren’t certified for Win11 as they are essentially e-waste.
Yeah you’re right with the currency conversion. I’ll check IMB.
If it’s just for storage, you can use a Pentium from 10 years ago without issues. My NAS currently runs on a Pentium G4560T (T suffix = 35W model), which is based on Kaby Lake (7th gen Intel). You can pick up one of these CPUs for stupid cheap, I think they go for maybe $5 or $10 here in the US. The NAS has not complained at all. That said, I am going to upgrade it to an i5-6500 I have laying around, but only because the i5 has vPro capabilities, which I utilize on my other machines.
I’m using a Google Pixel 3a - yes, it’s weaker than your desired spec, but I think it should be still enough for most of anything. I’ve never used Immich, tho, I don’t know how heavy it is.
Thats hot, what are you using for the OS?
And if stock android, gott in himmel how are you fighting the power saving shutdowns?
If you want Android, why on earth would you stay stock, tho? LineageOS works perfectly there.
Dumb politicians letting stupid companies lock bootloaders :(
Can’t say I’ve tried abusing vulnerabilities yet, but I’m worried I’ll lose hardware support flashing stuff that low level (dtb’s are scary)
PostmarketOS, now yclept Nura.





