Also much harder to insert for a machine. A torx bit can be inserted every 60 degree turn, which means it has to turn a maximum of 30 degree in either direction to slot in. Robertson an philips need to be turned 90 degree, so 45 degrees in either direction.
I beg to differ. It’s the other way around. Using a pozidriv screwdriver on a philips screw almost guarantwes that you will strip the head when tightening.
Tip: In case of doubt, use a Phillips screwdriver. While they do not perfectly fit into the Pozidriv screws, one can at least insert the correct size. The use of Pozidriv screwdrivers in Phillips screws works only with screwdrivers that are too small and easily leads to damage of the screw or the tool.
You can find a pretty good explanation here or here
Maybe in the US, but Pozidrive is very common here in Germany and other european countries in the form of “Spax” screws. They are the main screws we get for everything from wood working to wall mounts for pictures. They also don’t strip as easily as philips screws.
And trust me, I have seen plenty of philips screws beeing stripped ue to the use of pozi screw drivers while beeing perfectly okay when beeing removed with a philips screwdriver. Of course there are other reasons they strip as you mentioned, but here in Germany its a huge problem because Pozidrive is so common and people dont know the difference.
The reason for the stripping , that the shape of the tip is different.
Not only there, but also very commonly used in 3D printing and industrial applications like mounting stuff on metal rails.
Main disadvantage is that there are barely any versions that sit flush, so you either have to design your part with an indent or use them for designs where it doesnt matter.
Phillips usually strip when using a pozidrive screw driver on them. Very common mistake because people think they are the sams, but easy to avoid once you know it.
Also, the fit has to be tight. If it’s loose, the screw driver is too small.
Where can I sign up?