Blue_Morpho@lemmy.world to 3DPrinting@lemmy.worldEnglish · 1 个月前Your slicer is a large part of why your parts don't print accurately.lemmy.worldimagemessage-square16linkfedilinkarrow-up175arrow-down11file-text
arrow-up174arrow-down1imageYour slicer is a large part of why your parts don't print accurately.lemmy.worldBlue_Morpho@lemmy.world to 3DPrinting@lemmy.worldEnglish · 1 个月前message-square16linkfedilinkfile-text
https://youtu.be/7sAm3RtWh4M Investigation discovers the surprising result that slicers introduce more error into prints than the printer itself.
minus-squareGhyste@sh.itjust.workslinkfedilinkEnglisharrow-up7·1 个月前Can’t watch the video right now. Anyone know which is the best?
minus-squareKrackalot@discuss.tchncs.delinkfedilinkEnglisharrow-up11arrow-down1·1 个月前Prusa. Stay away from fusion most of all.
minus-squareSatyrSack@quokk.aulinkfedilinkEnglisharrow-up9·30 天前Is there a Fusion slicer? I just know of Fusion360, the CAD software.
minus-squareBlue_Morpho@lemmy.worldOPlinkfedilinkEnglisharrow-up7·30 天前Fusion lets you print from the UI. I have never used it. I always export an stl or step and load that into the slicer.
minus-squareKyuubiNoKitsune@lemmy.blahaj.zonelinkfedilinkEnglisharrow-up6·30 天前I’ve always used Cura, I liked the UI more (with some plugins) was anything said about it?
minus-squareKrackalot@discuss.tchncs.delinkfedilinkEnglisharrow-up3·28 天前In their tests, it introduced more errors into the print. Some version of prusa slicer is the best, but honestly, most of the time, the difference isn’t that crazy, but just another factor. Especially if you have other issues you may not know about.
minus-squarewia@lemmy.calinkfedilinkEnglisharrow-up10arrow-down1·30 天前Orca slicer seems the go to. I don’t really mess with much else anymore.
minus-squareGhyste@sh.itjust.workslinkfedilinkEnglisharrow-up1·29 天前Cool, already using Orca a lot. Thanks!
Can’t watch the video right now. Anyone know which is the best?
Prusa. Stay away from fusion most of all.
Is there a Fusion slicer? I just know of Fusion360, the CAD software.
Fusion lets you print from the UI. I have never used it. I always export an stl or step and load that into the slicer.
I’ve always used Cura, I liked the UI more (with some plugins) was anything said about it?
In their tests, it introduced more errors into the print. Some version of prusa slicer is the best, but honestly, most of the time, the difference isn’t that crazy, but just another factor. Especially if you have other issues you may not know about.
Thanks!
Orca slicer seems the go to. I don’t really mess with much else anymore.
Cool, already using Orca a lot. Thanks!