Ths might be a silly question, but asking those is how i learn sometimes. I’m trying to install my first Linux distro to set up a Plex server and one of the few things I know is you need a wired internet connection. My intended server location is across the house from my router, and there isnt much room there to set up temporarily. It would be possible, just a removed and a half. Is it instead possible to connect my SSD via SATA to USB to a laptop, install Ubuntu and wireless adapter drivers on it while connected to ethernet, then put the SSD in the server to boot? Or do I need to do all this through my intended setup?

Thanks for the help, just trying to make my first Linux install as painless as possible.

EDIT: Thank you all for your responses, I’m going to respond as I can since I’m at work. I The number one thing I learned is that I need to do more research. I recognize only a handful of these acronyms lol

  • rufus@discuss.tchncs.de
    8·
    1 year ago

    I’m not sure if Ubuntu requires a wired internet connection. I’ve installed a different distro yesterday and wifi worked fine during the installation. The installer asked me to connect to network and I used the wifi. I’ve never plugged a network cable into the machine. Maybe it’s the same with Ubuntu. But sure, there are other possibilities. Offline installers and/or you can install Linux on a different machine and then swap the harddisk/ssd. Just take care not to overwrite the internal disk of your laptop. Make sure it writes to the correct disk (or unplug other ones).

    • ursakhiin@beehaw.org
      6·
      1 year ago

      I believe the answer is no. I think it installs over Wi-Fi, fine, so long as the adapter isn’t a weird of brand or something.

      • fauntleroy@discuss.tchncs.de
        3·
        1 year ago

        That’s it. I have installed Ubuntu many times connected over Wi-Fi without any problems, except one special case many years ago. In that case, the system had some brand new Wi-Fi adapter, so I had to install the driver over Ethernet. But in almost any case it just should work and you can simply try to get a wireless connection in a live sytem to find out. And as mentioned above, internet connection is not necessary while installing from USB stick with the usual image. Its just recommended to save time and install the latest updates of some components during the initial system installation. But of course, you can do it later and of course you can do it over Wi-Fi (except some very rare special cases as mentioned at the beginning).

      • caseyweederman@lemmy.ca
        1·
        1 year ago

        Same as Debian since Bookworm (12). Nonfree firmware comes in the installation files now, so you can opt in or out at that stage and not have to scramble if you forgot.