Skip Navigation

Posts
2
Comments
563
Joined
3 yr. ago

  • There's no point retaliating once you're dead unless the enemy knows it's something you might do. You also can't make a plain A-bomb arbitrarily big as you need the fuel to be small enough to be subcritical until it's assembled, and simple enough to assemble that it spends so little time critical but not supercritical that a random decay doesn't cause a chain reaction to start before the mass is fully compressed. If it starts too early, there's enough energy to blow the bomb apart, which stops the reaction continuing. The more material you add, the more often random decays happen, and the likelier it becomes that the reaction starts prematurely. The theoretical limit is somewhere between 500kT and 1MT, which isn't very much for a city buster, especially if you've buried it. You'd have to use more than one, but a pure fission bomb is very senstive to nearby nuclear detonations, so only the first one would be likely to work.

  • You've linked an article about a tank with an anti-drone cage being defeated, so even if it does point out that there are situations where a shaped charge can be made to work on a drone, it doesn't support the original claim that shaped charges can be protected against by a small anti-drone cage.

  • That only debunks it if Lucas spent a lot of time thinking about Dutch and if Luke Skywalker is the only person who ever had a father.

  • This has the slight problems that:

    • The UK's now trying to make VPNs illegal, and was obviously going to because of the obvious flaws in the Online Safety Act.
    • They consulted with MindGeek about the law before passing it, and they own most of the sites with a route to remain viable businesses under the current law, and several agree verification services, so they're a much better company to blame for this.
  • Armour piercing shaped charges are more sensitive to the direction they hit at than to the distance, so they're unsuitable for use on drones because you're rarely, if ever, going to line them up just right, and armour piercing squash head munitions need to be going fast enough that they squash against the armour they're trying to pierce before detonation, so need to be carried by something much faster than a drone. Suicide drones just have a lump of explosive as heavy as they can carry, and being 30cm further away from a simple explosion rarely stops it ruining your day.

  • Modern nukes contain a subcritical mass of fissile material and require an injection of tritium to arm them, and also require tritium for their second stage to get most of their rated yield. Tritium doesn't last very long, so needs regularly topping up. If you've secretly buried a nuke, you'll have to dig it up pretty often, undermining the advantages of secret burial. There's also not much point in having a better nuclear deterrent than your enemy knows about, as the goal is to make them know you can destroy them so they're too scared to attack you rather than to actually destroy them.

  • That was mainly when Russian equipment was getting mesh fitted directly to its outside instead of cheap netting being placed over roads. If you fit an anti-drone cage to something, it only moves the explosion about a foot further away, which often isn't enough to make a meaningful difference to survivability. If you make the cage bigger, your vehicle stops fitting though gaps, so that's not practical. Covering a road can keep the explosion metres away, though, and protects everything using the road rather than just the one vehicle.

  • TOML

    Jump
  • TOML's design is based on the idea that INI was a good format. This was always going to cause problems, as INI was never good, and never a format. In reality, it was hundreds of different formats people decided to use the same file extension for, all with their own incompatible quirks and rarely any ability to identify which variant you were using and therefore which quirks would need to be worked around.

    The changes in the third panel were inevitable, as people have data with nested structure that they're going to want to represent, and without significant whitespace, TOML was always going to need some kind of character to delimit nesting.

  • CV padding and main character syndrome.

  • You can get loads of frames per second with cloud gaming, just not necessarily from the right second.

  • Password managers are supposed to be designed to resist a situation where they're compromised, and are only ever supposed to see a mysterious blob of encrypted data without ever having access to any information that would help decrypt it. The headline's more like M1 Abrams Tanks Vulnerable to Small Arms Fire - it'd be totally expected that most things die when shot with bullets, but the point of a tank is that it doesn't, so it's a big deal if it does.

  • The DHT11 has been replaced twice with similarly-priced but more accurate models, first the DHT22 and then the AHT20. In my experience, the AHT20 is a lot better than the DHT22, mainly because its power consumption is far lower, so it doesn't mess up its readings by getting hot.

    Also, at that size, I'd be very surprised if the dehumidifier has a compressor. It's much more likely that it's got a Peltier plate, and they're not very good. They use a lot of power to develop and maintain a fairly small temperature difference, so if they're in a confined space, they heat up the air quite a bit, and then the water from their tank will more easily evaporate.

    If you're willing to spend some money, a solid state ion membrane dehumidifier might be better for a small cabinet than a compressor-based one, as it'll be easy to ensure the water goes out of the cabinet instead of into a container that can't be emptied without opening the cabinet and letting more humidity in. They're definitely not cheap, though. I think they're still under patent as there's only one manufacturer that I can find, so maybe they're the dehumidifier of the future even if they're not suitable right now.

  • There was a while where it obviously met and exceeded the definition in the UN Genocide Convention, but a lot of people refused to acknowledge it might be a genocide because the UN had not yet declared it to be one. The UN is notoriously slow at that kind of thing, though, especially when a powerful country wants them to be slow.

  • If it's the problem that I've seen people complain about in the past, it's effectively the same as HTTPS 'not supporting' end to end encryption because it runs over IP and IP packets contain the IP address of where they need to go, so someone can see that two IP addresses are communicating, which is unavoidable as otherwise there's nothing to say where the data needs to go, so no way for it to get there. Someone did a blog post a couple of years ago claiming Matrix was unsecure as encrypted messages had their destination homeserver in plaintext, but that doesn't carry any information that isn't implied by the fact that the message is being sent to that homeserver's IP.

  • It was £7, so likely not worth the effort - if they want me to pay to ship it back, then that would cost about as much as the roll did - and it's now outside the warranty period, so that would be pointless anyway.

  • When it's hot, it stinks of hot ABS, and it dissolves in acetone. I've read that sometimes budget filament manufacturers will use the same pigment across their whole material range, even if it's not capable of withstanding the print temperatures of some of them, but it's ABS+ rather than pure ABS, so it could be full of mystery additives that don't handle heat well, too.

    There's not much point using it as glue as I'm not going to get through a whole kilo worth of ABS glue, and produce more than enough ABS scraps from test prints and support to always make a colour-matched glue anyway.

  • 3DPrinting @lemmy.world

    What to do with a roll of unprintable filament

  • It's a federated Twitter alternative. It's existed for a while - the initial release was in 2016, but obviously with all the Musk-related nonsense in the past few years, it's grown a lot.

  • There are situations they don't cover, e.g. if you choose a sender address from the same domain as the real address. Obviously, lots of email services check for that, but it's not universal - it was a great tool for pranks at university for me.

  • The from field in an email is something that the sender sets, and they don't have to set it to anything in particular. Unless your email client stops you (which is pretty common these days) you can just enter a made up address, another address that you'd rather receive replies through, or someone else's address. It's one of the reasons why phishing emails work - there's nothing stopping a scammer impersonating anyone they want to.

  • I reckon it depends on how warm someone's home is and how good their circulation is. If I don't have shoes on indoors, then for half the year it feels like my feet have been stabbed because they get so cold (slippers are not enough), but I don't wear the same shoes indoors as outdoors. I suspect that if we set the heating higher and the house wasn't constructed in a way that makes the floor always much colder than a few inches above the floor, this wouldn't be a problem.

  • Model Makers @lemmy.ml

    How long does Mr Color Levelling Thinner take to stop smelling?