I’ve been using my carrier’s router for a while now but I’ve been having some issues. Though speed tests show nice speed, the consistency of the signal is very bad. I work from home in an office with my SO and when we’re both using the internet the signal can become really bad. Currently getting 20% signal strength and having a hard time keeping my teams call up.
The router is not that far, like 10-15m away but does go through a wall. Ethernet cables are unfortunately not a possibility and since we both have desktop computers we’d rather not move.
Looking for a router around 100 euros, preferably available on Amazon Spain so I can return it if it doesn’t solve my problem. The goal is to shut down the carrier router’s wi-fi and just use the new router for all the networking.
I don’t having any special requisites. Wi-fi 6E would be a nice to have but honestly wi-fi 6 is good enough. Solid connection is the most important thing for me.
Thanks!
OK first off, check out what WiFi band is getting through. You can get some mileage by enforcing the router and clients to connect on a specific band - they are supposed to auto select based off the best/least congested band, but these days nearly everything is squawking away there. You could try relocating your router/AP and testing - if there’s a duct or a bunch of pipes in the way they may be interfering or opaque to the radio band, so moving the router might honestly result in better performance. Tape it to the ceiling if you have to (3M command strips work pretty well)
2.4Ghz gets far greater wall penetration than the modern high bandwidth 5Ghz band solutions, but it’ll be limited to 54mbps or slower.
Not all WiFi access points are created equal. The antenna on a Linksys Router/AP ($??) vs. the antenna on an Ruckus AP ($500+) is a totally different animal, and it shows.
Effectively trying to coax a good signal out of radio equipment without a proper survey is more akin to dowsing or engaging in a magical ritual than anything really technical though…