Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)R

rambos

@ rambos @lemm.ee

Posts
19
Comments
297
Joined
2 yr. ago

  • Automatic Fire Extinguisher for 3D Printer Cabinet

    Jump

  • It doesnt happen often ofcourse. It is super rare, but there are many horror storries on google. I think the biggest reason for fire hazard is a kitchen stove, still most people dont have any protection even there (including me).

    These cans cost like 2-3 kg of filament and hopefully they will never be used and end up like a "waste of money". Im spending money on this hobby anyway and this upgrade might help me sleep better 😁

    Sorry for anxiety my friend

  • Little help here linux guys? Trying to figure out what distro to use

    Jump

  • Ive been using 3 monitors on gtx1060, runining popos

  • [Troubleshooting] Big stringing problem with flsun SR and Orcaslicer

    Jump

  • Now I’m worried if I’ve got my Bowden tube seated in the hotend correctly…

    Just pull/push the tube with your hands. If there is no play you are good, but if there is:

    1. Inspect the bowden tube ends and cut them if they are worn out
    2. Push the bowden tube in the fitting.
    3. While pushing it in, press the collet down
    4. Then pull it out with a nail and then zip tie it

    I found original clips too thin, zip ties are much better IMO. It helped me remove stringing completely while using half of the retraction distance (using 0.6 nozzle)

  • [Troubleshooting] Big stringing problem with flsun SR and Orcaslicer

    Jump

  • lemann gave some good points. Since you already tried so many things like lower temp than recommended and drying, I guess bowden tube might be loose (there should be no play at all). Or just a bad filament? I know esun is quite popular, but I never tried it.

    What size of the nozzle you use? Bigger nozzle = more stringing

    It is hard to avoid stringing with PETG, but for PLA it shouldn't be a problem at all. My bowden extruder with 3 mm retraction has 0 stringing with Polymaker Polyterra PLA. Even with 1 mm stringing is almost gone completely. I found Polymaker much better with stringing than DevilDesign or AzureFilm that I used before.

  • ‘My whole library is wiped out’: what it means to own movies and TV in the age of streaming services

    Jump

  • No scripts and it was more like 30 hours on my side, but its worth!

  • Jellyfin | "We are pleased to announce the latest stable release of Jellyfin, version 10.9.0!"

    Jump

  • Can you explain this please

  • I've got a mix of good, bad, good, bad, and good again news/progress

    Jump

  • Higher chamber temp should help and I think its the best way to deal with this issue. If you are going to try a different build surface like Kapton, consider gluing PEI sheet directly on the alu plate instead (not the spring steel sheet, just a PEI)

  • I've got a mix of good, bad, good, bad, and good again news/progress

    Jump

  • If you cant increase chamber temp, you can try reducing bed temperature. There is a minimum bed temp you need fot first layer, but you can try dropping it even more (5C) after a layer or two. PEI shouldnt loose adhesion and you will have a bit less shrinking. Not sure would that be enough for your part tho, warping is massive

  • Here is what 6 decommissioned servers looks like. My Jellyfin will be very happy

    Jump

  • At idle, my latest 5-drive setup draws 20 watts

    That's super low. What drives do you have? Are your drives spinning down?

  • pooch/repkord made a printer lift itself

    Jump

  • I hook a filament around my neck before going to sleep. Every morning extruder pulls me out of the bed instead of using alarm. Don't need a clock anymore and love to print in the morning anyway

  • m3u (iptv) server which is not Jellyfin?

    Jump

  • Oh ok, I've never seen something like that. Let me know if you find a solution

  • m3u (iptv) server which is not Jellyfin?

    Jump

  • If you need it for Android than try TiviMate. Its a payed app (annually or lifetime), but its the best one I found. Free version should work enough to try it out. I got lifetime and love it, but sometimes EPG doesnt work (could be issue with my provider tho)

  • Chonky nozzel + decent amount of material = opportunity for lots of spaghetti

    Jump

  • Thx! Sounds like rly good deal, but 3 kg is not for me honestly. I dont print that much and also my spool holder is too small. 500 g spools would be better for me hehe

    Not sure what EM is, but if you meant that some parts of print are shiny and the rest is matte, its probably different flow. Having equal speeds should fix that, I saw a video where they reduce max flow as solution

  • Chonky nozzel + decent amount of material = opportunity for lots of spaghetti

    Jump

  • Thanks, I ordered some Polymaker ASA recently, will try it out.

  • Chonky nozzel + decent amount of material = opportunity for lots of spaghetti

    Jump

  • Completely agree, but I have no experience with ASA. 22 mm3/s is super high, Id probably start with the highest temp marked on the spool. You can also test your max flow.

    On the other hand, you had a layer shift which could happen for other reasons as well

  • Is it possible to safely torrent without a VPN?

    Jump

  • I use it in croatia, but its so funny here since no one really cares. people around me torrent on daily basis for 20ish years and nobody got ISP letter. Even friends are laughing because I spend money on that lol. Its only 5€ a month and I use it for other things as well. Just get it if you can or 🤞

  • Switching from win 11

    Jump

  • Thank you for explaining this. I was sure its the same thing with different gui, but it all makes sense now

  • Switching from win 11

    Jump

  • Pop!_Shop

    That app was slow and laggy for me. I started using app called "Software" and that one is amazing.

    I don't know why we have 2 stores preinstalled and what is the difference

  • Why is Firefox mobile's PDF view so bad, while Desktop's is perfectly fine?

    Jump

  • I dont know, I have ublock, but not using the rest