It was the SCADA view right? A lot of SCADA software is basically running on top of windows, though you typically would never see the desktop. Ignition at least is cross platform, but that is because the server is Java and Jython. A big part of why things are running on windows is due to OPC, which was traditionally all DOM and .NET. It is basically a standard communications protocol and is what allows your HMI/SCADA to communicate with PLCs. Otherwise, you use proprietary drivers and native PLC specific protocols.
SCADA programming/design is kind of an art and is usually written by an either an overworked engineer or someone who had far too much time on their hands. You basically build screens using specialized software, hook up buttons and UI elements to PLC signals, and pass some signals from the UI to the PLC. They are all heading in the Edge/iot/cloud/web based/techno-babble direction these days...
Thank you for answering the question! I am genuinely both trying to make a point and still be open to try new things. To me, there seems to be a real downward turn on UI/UX in a lot of applications these days, corporate included. When they mentioned the bit about supporting corporate, I have a hard time believing they will get very far with that customer group right now.
I really wish software, especially FOSS, would stop making the UI the afterthought. I try to keep a holistic view when designing things and everyone has a seat at the table. I wonder if projects are boxing themselves in and making it harder for the UI teams to properly integrate, and vice versa? I will happily take criticism and ideas from pretty much anyone, especially outside my immediate teams.
I am pretty out of the game on that as I spent quite a few years doing controls engineering instead. I am back in Software now and I feel old and a little lost. I graduated back in 2012 and we didn't have all of these crazy developer roles and more specialized degrees. They were trying to get a Game Design program started when I graduated, and it was supposedly a mess for a few years.
All I read is Marketing Tech Speak that sounds no different than anything else that gets advertised in my face. At work, we use Teams. It is a pain sometimes when it gets a little buggy, but integrates into SharePoint/OneDrive and the noise suppression in meetings is pretty awesome. At home I use discord or GChat because that is where all my friends are. I don't assume I have privacy on any of these platforms and they all work on my phone and computer.
How is the user experience? Ultimately, give me privacy, but if the user experience and UI don't give any improvements over the corporate ones, I will have to try it some other time.
I am sorry, but PSL is damn delicious. It didn't taste right last year and there were even some comments on Twitter about it. Starbucks swore they didn't change the recipe, but I am convinced they were lying. This year, it tastes like it used to. No more sort of burnt caramel taste. Yay tasty beverage!
Now, go have one! It is ok to like the "trendy" thing. Maybe have them tone down the sweetness. Or find a non-Starbucks version at a local cafe. Or don't. More for me!
That is some definite bullshit. I am both a software developer and a controls engineer. That stuff irritates me to no end, but I also understand how these systems can fail. They will always protect themselves over the user/customer, so thus we suffer. Hell, I used to do Amazon projects on the controls/industrial side. Amazon had their own software systems that they built/stole running things overall, so thankfully I didn't have to deal with trying to make them happy on the software side too. I much prefer programming the machinery.
I always take it to my UPS store down the road instead of boxing it up and sending it out. You don't package the item up at all. They scan the barcode on my phone and take the item. Done, return processed. If they steal it afterwards, not my problem since the code was scanned and you get a notification/receipt. They have a lot of strange locations you can take it to, including random big box stores.
Ok. Let's do this! If you have a 4 cup pyrex/microwavable measuring cup, it is much easier.
Sauce pan with a lid. Nonstick is fine.
2 cups of rice using dry measuring cup
3 cups of water
Salt if using unsalted butter
2 tablespoons of butter
Put empty pan on stove and set heat to medium-high. If these are steel pans, stick to medium. Go towards high if nonstick as it takes a bit to heat up.
Put water and butter in microwavable cup and throw it in the microwave until it starts to simmer, maybe 3 minutes? Depends on microwave and dish.
While you are waiting on microwave, put dry rice in pan and gently stir/fold. They will start to turn white, but don't let them burn. If you need to take the pan off and turn the heat down, do it. We are just preheating the rice and pan up. Add salt if needed.
Get ready. As soon as that water is hot enough to boil or close to, take it out, pour it in the pan. It will be violent.
Do a quick stir, throw the lid on, and turn the heat down to the lowest setting. The water should fully cover the rice.
Walk away. The bottom might toast a little, but that is fine as long as it doesn't full on burn.
After 20 minutes or so, you can do a real quick check and if it looks kind of wet, throw the lid back on and wait.
At this point, you should have perfectly acceptable rice. Take the lid off, stir the rice with a more folding motion to let it steam any additional moisture out.
Most people don't have a passport. It is expensive and a pain to get one. If you don't ever leave the country, most see no reason to. We don't have national IDs, but we do have state. Technically, they rolled out this new RealID crap that is probably closer to a national id, but you have to pay extra and it is still done through the state. Neither of these are required. If you drive, your drivers license is your ID. Otherwise, you can get a state id so you can get alcohol, weed, cigarettes, and other dumb shit. When you get your ID, you can register to vote right there if you qualify and I think you can get a paper card. There is no reason to go through any extra hoops once you register to vote. You are in the system as a registered voter.
I assure you, you get icy roads and snow at 28-30f. Upstate NY gets tons of snow and most of that is above 25f. I don't see it get in the teens too much. Single digits or colder is pretty rare. All depends on the region up here. Due to the lakes, it is all over the place.
I think the highest speed limit I have seen in America is 85mph, which is around 135km/h. Typical highway speed limits though are 65mph, but everyone goes 5-10 over (105-120km/h).
The nice thing about mph is the whole mile a minute at 60mph. Makes it easy to mentally estimate time of arrival.
Not sure I understand what you are saying. I do a real big twist and then a slip knot. The twist doesn't come undone. I am out of bread or I would take a picture.
I do the same. I don't understand why it puzzles some people. They look at me like I put a padlock on it and I have to undo it for them, which is just pulling the end...
I think everyone has explained the how and why, but not any real solutions that don't involve using a completely different application. I don't have an iPhone in front of me, but with Android you can share as a link to Google Photos instead of sending the picture/video directly. I am pretty sure you can do something similar with iCloud. Have her try the share as iCloud link instead.
Update: I just tested it. I had them open up Photos, go to the image/video, tap the share button, and then if you scroll down a tiny bit there is a share as iCloud link.
I was able to view it just fine on my Android phone.
It was the SCADA view right? A lot of SCADA software is basically running on top of windows, though you typically would never see the desktop. Ignition at least is cross platform, but that is because the server is Java and Jython. A big part of why things are running on windows is due to OPC, which was traditionally all DOM and .NET. It is basically a standard communications protocol and is what allows your HMI/SCADA to communicate with PLCs. Otherwise, you use proprietary drivers and native PLC specific protocols.
SCADA programming/design is kind of an art and is usually written by an either an overworked engineer or someone who had far too much time on their hands. You basically build screens using specialized software, hook up buttons and UI elements to PLC signals, and pass some signals from the UI to the PLC. They are all heading in the Edge/iot/cloud/web based/techno-babble direction these days...
Ignition, programming software is free!: https://inductiveautomation.com
Some other random ones I have seen or used in the past: https://www.siemens.com/global/en/products/automation/simatic-hmi/wincc-unified.html https://www.aveva.com/en/products/intouch-hmi/ https://www.rockwellautomation.com/en-us/products/software/factorytalk/operationsuite/view.html