Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)B

bigredgiraffe

@ bigredgiraffe @lemmy.world

Posts
0
Comments
63
Joined
3 yr. ago

  • TrueNAS Scale, hard disks, and pools

    Jump

  • Okay so when you say “unplug the power” do you mean shut it down first or just pull the plug? The latter is a great way to corrupt your storage pools as ZFS uses memory for read and write cache etc by default. You definitely need to do a graceful shutdown especially if there is data that was recently written to disk, that’s why a UPS is so recommended. That said you can usually import an existing pool when that happens, I think there is a UI menu for it now.

  • Your recommendation for smart plug

    Jump

  • As others have said, be careful with fans if they are large, many of the plugs don’t have a very high wattage rating and are all definitely rated for 15a at max usually, you might consider a smart relay instead (like a Shelly or something).

    That said I have switches and plug-in and in-wall relays from Aqara (zigbee) and TP-Link (WiFi) and zooz (zwave) and all are fine and do the job. Not all support power monitoring if that is something that matters to you, it’s not a universal feature.

  • mDNS behind a gluetun container?

    Jump

  • Have you tried adding 239.255.255.250/32 to your outbound subnets variable? This is the multicast address for SSDP which mDNS ultimately relies on if I remember right, I recall having to do this for Plex in the past.

  • Help Needed: Homepage Dashboard "Failed to construct 'URL'" Error

    Jump

  • Just to make sure, all of your links need to be in quotes if they are not. The : in a url can make some yaml parsers think that it is another block, there are other URL safe characters in general that are special characters in yaml so it’s a good idea to put them in quotes.

  • Trouble keeping a top-heavy TPE part on the bed

    Jump

  • In addition to everyone’s suggestions, have you tried rotating the part so it is at a 45 on the bed? This will keep the printer from accelerating as much in the Y direction since it is not a straight motion, I used to have to do that for tall prints on my Mk3 sometimes.

    Also, if I were printing that part I would flip it over unless there is some reason you can’t. You might also get more rigidity using normal supports for the large surface facing the bed, might print faster too, tree supports for large areas take a while for me usually.

  • DIY Sonos Project

    Jump

  • This is a cool idea! This sounds a lot like what DANTE and AES67 or AVB are used for in pro audio (mixing console sends multichannel and outputs can subscribe to one or more channels), maybe they have some ideas on timing sync which I think would be the hardest part as others have said, it is crazy how small of a jitter your brain can hear.

  • Deleted

    Permanently Deleted

    Jump

  • I remember your first post a year or so ago and dang you have been busy, it looks really great. I will definitely be installing this at home to organize product manuals and such.

  • Petg Calibration Issues

    Jump

  • Have you ever dried this filament? Silica beads won’t dry out filament, they will just keep the air in the box dry. I have definitely had to dry filament from the factory, especially PETG.

  • This Week in Self-Hosted (10 January 2025)

    Jump

  • I don’t have anything to add but I am glad someone posts this every week, I always find something new, so please keep it up :D

  • What companies are currently creating #ESPHome devices that you have bought and used? #homeassistant

    Jump

  • Open WebUI - The best UI for AI I've found

    Jump

  • Just to add my 2c, I just started using this the other day just as an quick UI for ollama and I was blown away at how many features it has and i think the interface is well done. It’s really a great tool so far and I’ll definitely be using it more going forward!

  • (SOLVED) Is it normal that browsing to my own WAN-IP shows my Omada controller interface?

    Jump

  • I know you solved it but for anyone that finds this later this feature/behavior is typically called “NAT Hairpin” in case you are looking for a setting to enable or disable, hope this helps!

  • TPU wall thickness for shoes

    Jump

  • Just to add what others have said, the temp you dry at is as important if not more important than time and different for each type of plastic. If you don’t have it hot enough (typically near the glass transition temperature of the plastic) then the moisture is not able to escape the plastic.

    Cool project as well, I have wanted to do the same!

  • What is you settings for PETG?

    Jump

  • Ah yeah that is good, just making sure because it has caused me a lot of strange issues hah.

    One thing that prob doesn’t matter but I usually dry PETG at 55 or 60, not sure how much of a difference that will make, 51 might be warm enough though. From what I have learned, it has to be warm enough that the moisture can escape the plastic (usually just below the glass transition temp) so you might try turning it up a bit if nothing else works because the moisture might not be escaping.

  • What is you settings for PETG?

    Jump

  • A lot of good avi e from others but definitely don’t discount drying it out, especially if you live somewhere that the air RH is over 20% as it will definitely suck it out of the air and act all kinds of odd in my experience.

  • Deleted

    Permanently Deleted

    Jump

  • Dang I thought it couldn’t be that bad but even the fist sentence is a struggle and seems to be incomplete let alone the first paragraph barely making any real sense at all.

  • Best HACS Integrations for Home Assistant 2024

    Jump

  • This is a great list! Discovered a few new ones, thanks!

  • Comic Sans Got the Last Laugh

    Jump

  • Help me choose a 3D printer of my own

    Jump

  • Lots of good recommendations here, my usual recommendation is that if you want 3d printing for a hobby to get a Bambu or similar because they just function out of the box for basically all materials. If you want 3d printing to be the hobby then a Prusa or Voron as others have said, way more tinkering to be had. Both are lots of fun though!