Person with vested interest in X says X will continue to proliferate. More at 11
Also, for some extra context:
Stupid elon
We’ve done this exercise recently for multi-petabyte enterprise storage systems.
Not going to name brands, but in both cases this is usable (after RAID and hot spares) capacity, in a high-availability (multi-controller / cluster) system, including vendor support and power/cooling costs, but (because we run our own datacenter) not counting a $/RU cost as a company in a colo would be paying:
- HDD: ~60TiB/RU, ~150W/RU, ~USD$ 30-35/TB/year
- Flash: ~250TiB/RU, ~500W/RU, ~USD$ 45-50/TB/year
Note that the total power consumption for ~3.5PB of HDD vs ~5PB of flash is within spitting distance, but the flash system occupies a third of the total rack space doing it.
As this is comparing to QLC flash, the overall system performance (measured in Gbps/TB) is also quite similar, although - despite the QLC - the flash does still have a latency advantage (moreso on reads than writes).
So yeah, no. At <1.5× the per-TB cost for a usable system - the cost of one HDD vs one SSD is quite immaterial here - and at >4× the TB-per-RU density, you’d have to have a really good reason to keep buying HDDs. If lowest-possible-price is that reason, then sure.
Reliability is probably higher too, with >300 HDDs to build that system you’re going to expect a few failures.
I bought 18 TB seagate exos x18 drives for about $400 AUD each this year. What price are 18TB SSDs at?
Around AUD $4500
Mr Toshiba needs to fix his numbers!
Haven’t hard drives been cheaper per storage amount than SSDs forever? The problem was always that they were slow. I think tape may still be cheaper per storage amount than hard drives, but the speed is abysmal.
Edit: yeah looks like tape is 3x to 4x cheaper than hard drives https://corodata.com/tape-backups-still-used-today
Yes. SSDs are still excellent for small form factor and speed, but for long term reliable storage in massive volumes, old fasion hard drives are only second to tape storage.
Source: I am in charge of four 1.2PB storage clusters, each consisting of 144 10TB Toshiba drives. The systems write their output to 10TB tapes for data delivery.
Wendel from level 1 techs really likes the multi actuator spinning rust drives. You still wouldn’t use them for a boot drive, but they’re fast enough to saturate a sata connection, while still being much more dense than ssds. They can achieve 500MB/s sequential speeds, so they’re plenty fast for large file access. Most consumers should be using SSD’s but if you’re dealing with more than a couple terabytes, the best solution isn’t as straightforward.
Tapes themselves are cheaper but there’s also the upfront cost of the tape drive (we’re talking thousands).
And that there is the real crime. It’s a real shame no one’s making a tape drive at the consumer market price point. Tapes are a hell of a lot more convenient for backups and archival than the giant weird pile of storage formats we’ve seen over years.
I’d love to see what could be done with current tape storage technology in standard compact cassette format.
There’s some space occupied by the servo tracks (which align the heads to the tap) in LTO, but if we ignore that…
Current-generation LTO9 has 1035m of 12.65mm wide tape, for 18TB of storage. That’s approximately 13.1m², or just under 1.4TB/m².
A 90 minute audio cassette has around 90m of 6.4mm wide tape, or 0.576m². At the same density it could potentially hold 825GB.
DDS (which was data tape in a similar form factor) achieved 160GB in 2009, although there’s a lot more tape in one of those cartridges (153m).
Honestly, you’d be better off using the LTO. Because they’re single-reel cartridges (the 2nd is inside the drive), they can pack a lot more tape into the same volume.
My 8TB Seagate failed a week ago and I was looking into new drives. The cheapest HDD was around 25 EUR per TB (for the 18TB ones) and the cheapest SSD were under 50 EUR per TB. No idea where this “7 times cheaper” comes, maybe from 2015.
I ended up buying a 4TB Crucial MX500 with 4TB for 208 EUR (barely enough for my data, but with some cleanup it will hold a year for sure).
Not only it’s faster, it’s smaller (fits in the NUC), it’s quieter and it consumes much less electricity. I don’t think I will ever buy an HDD ever again. Maybe for surveillance recording?
Not that many 18TB SSDs available though. Might (and probably will) change in the future, but today, if you want massive amounts of storage, HDDs are your only reasonable solution (ignoring magnetic tape) unless you really require the read & write speeds of an SSD. Imagine Backblaze trying to replace their 46000 16TB HDDs with a few hundred thousand smaller SSDs in their datacenter.
They ain’t called Seabricks for nothing. SSD will let you sleep at night.
No idea where this “7 times cheaper” comes
Probably from back when Toshiba was relevant
You compared cheapest by cheapest, however items cost is more efficient with larger sizes
If you compare the best GB per $ sizes of both media types it is likely going to much more apart.
I compared cheapest per TB. The HDDs were most efficient at 18TB, the SSDs at 2 or 4 TB.
Oh I see. I need better reading comprehension.
When I do the same calculation I come up with HDD being 4.5x cheaper per TB.
And yet, at my local microcenter, I couldn’t find a hard drive cheaper than an ssd of the same size.
I mean, with stuff like ZFS, it’s a little hard to justify the outlay for all solid-state disk storage when I can build out a large storage array using HDD’s and use one mid-size SSD for ZIL and then L2ARC to provide read/write speedups. Who actually cares what the underlying storage mechanism is as long as the dataset is backed up and the performance is good?
Power consumption, noise, durability…
There is a lot of power to waste for the savings you made, when not buying expensive SSDs (20€ a year is not much). Where we use HDDs, we don’t care about noise. Durability? We use huge RAID systems with lots of redundancy.
I personally like to swap new drives after 5 years to avoid failures. So when you find a 16 TB SSD for 350€, you send me a message.
deleted by creator
My 4 bay HDD NAS uses around 45W, 50W with some light load, 70W spinning up. That’s about 1kWh per day, or 150 EUR per year.
I use it in my room, so I very much care about noise.
More durability = less redundancy (less cost) + less frequent swaps (less cost). My anecdotal evidence is 1 failed SSD in 15 years (160GB Intel, basically first Gen). Every other SSD is still working. I have a drawer full of failed HDDs.
Plus more performance.
Geez power is expensive for you folks.
In Vancouver we pay 0.14 CAD per kWh (.096 EUR) for usage beyond 675kWh in a month. (0.0975CAD, 0.068 EUR, before the threshold)
With the SSD’s I can afford, there are what you might call “net negative savings” when I save maybe a couple dollars in power a month but have to replace them every few months. We can’t all afford EVO’s.
This is my thing. I have about 122TB of spinning metal (with the same as an offsite backup) with SSDs as ZIL and L2ARC. And it’s awesome. HDDs I think will genuinely be important for for the foreseeable future.
As a newb I hope one day in my journey, I can look back at this and say “I finally understand this.” Til then thank you, magic man
Toshiba’s estimates feel reasonable. While the price difference is slowly narrowing compared to the widening performance and form factor gap, it’ll certainly continue to be a slow death. The current price ratio would need to be inverted before it makes sense to drop hdds entirely. And even then tapes will still be around forever.
With investments in storage tech being so diverted away from HDD technologies I wonder how much further capacity will get. We’re already at the point where disks have many platters and HAMR is finally going to be delivered after decades of “coming soon”. It feels like, much akin to processor fab, we’re approaching a wall.
Use HDDs for linear read/write (files) and SSDs for IOPS (databases)
I just bought a microcenter brand 1 TB SSD for less than $50. Can a HDD compete with that on price and read/write speed?
Also recently bought a gaming PC that does not have a HD, only a 1 TB SSD.
I think HDDs day as boot drives is over. Unless they get a lot faster which I think is unlikely.
HDDs are certainly useful for larger amounts of storage, though. Self hosting, data centers, etc.
ETA: I don’t think any of the responses read my entire comment. See the LAST SENTENCE in particular, friends.
I admin a datacenter and hard drives are never going anywhere. Same with tapes.
I work tech support for a NAS company and the ratio of HDDs to SSDs is roughly 85-15. Sometimes people use SSDs for stuff that requires low latency, but most commonly they’re used as a cache for HDDs in my experience.
Not much point in using SSDs in a NAS if it’s there just for holding your files
