Recently bought a used Switch 1 as people were getting rid of them to buy the new one, but I found out that mine came with an insane amount of drifting.

Opening it up was a pain in the ass and pretty scary, but I managed to fix it by putting a card over the metal plate on the left (to apply pressure under the joystick as many people online instructed)… And it worked!

It used to drift all the way to the left whenever I let go of the analog stick, but now it snaps firmly back to the center. Just wanted to put out a PSA that if your Joycon is drifting, it’s very fixable. All you need is the right screwdriver and being very careful when lifting up each piece.

  • Leon@pawb.socialEnglish
    161·
    4 days ago

    They have the added bonus of the joystick caps being able to just pop off and replace, which is great because the original sticks can just spontaneously fucking melt.

    I’m still mad.

      • Leon@pawb.socialEnglish
        81·
        4 days ago

        I genuinely have no idea. I’ve read online that it could be because of

        • Skin oils
        • Lotion
        • Alcohol
        • Other detergent

        Skin oils seems ridiculous because I’m not oilier than your average person, and it’s literally meant to be used with your fingers so if it can’t handle skin oil from your fingers without breaking the fuck down that’s a massive design flaw.

        I basically just left it in its case for ~9 months or so, closed in the TV bench. There’s no way UV reached it and broke down the plastic.

        The fact that a ~€20 pack of 2 replacement switches are mechanically better, and also designed to have the caps be removable so you can replace them is criminal, given that the controllers themselves cost like €80 by default. I’m definitely not buying the Switch 2.

        • heythatsprettygood@feddit.uk
          English
          71·
          4 days ago

          This looks like a case of rubber reversion (also why old rubberised stuff on phones and such gets super sticky). What sort of temperatures were there in the TV bench? If it got hot from other equipment inside or external heat, that could significantly accelerate the damage. Either that or during the production process the rubber wasn’t produced properly (chemical stabilisers not working properly, so on) which is entirely likely considering the disaster that is the Joy Con 1.

          • Leon@pawb.socialEnglish
            21·
            4 days ago

            I believe it’s an original switch. Bought it quite long ago. The temps shouldn’t get very high on account of it not being in the sun and also there being no other equipment there.

            • heythatsprettygood@feddit.uk
              English
              31·
              4 days ago

              They probably screwed up the rubber making then. For some reason, early Joy Con 1s in particular have even more defects than most of them, possibly due to sloppy and rushed production. It’s a shame this happened though, because you should reasonably expect this to not happen on a product you buy for hundreds.

        • ulterno@programming.devEnglish
          1·
          3 days ago

          My previous mouse pad’s rubber had been breaking down due to the oils and sweat and my palm pressure.
          These things tend to do that.

          I have added this one additional consideration on frequently touched devices that I own.
          Got a mouse, bought the plastic finish version instead of the rubber finish one. Got headphones, considering (-ing because that was the thing that made me start considering and I didn’t consider it before) ear-pad replacement options. Got a torch with a rubber-like cover: well that’s an outdoor thing made for light rain, so hoping it is rugged enough.