I think a more direct translation is “The city of the future moves on a bike”. Not sure what google translate says but those sites usually miss the subtleties of language.
Cool, thank you.
aero as fuck riding position
@7bicycles @lemmyreader banned within minutes by the UCI
I wonder how much damage to utility cycling the UCI has done. Maybe its not worth unpicking since the harm is so much less than the motor lobby.
Its just such a shame that UCI compliance dominates cycle manufacturing.
@zerakith they are self-important clowns, tbh
UCI compliance only dominates the very narrow range of racing road bikes and gravel bikes. It has no bearing on utility cycling, because bikes made for utility are not made to UCI standards.
And since we were talking about aero…it also has little bearing on bikes made for time trialling, since although there are UCI rules for TT bikes, the majority of bikes made for time trialling are sold to triathletes, who are not governed by the UCI.
I didn’t mean that all bikes sold were UCI compliant as directly as that. The market has focused on pursuing a fairly narrow definition of performance for a bike in part because of the narrow definitions of racing cycling. That’s had knock on effects for the type of components that have been focussed on and developed. The near ubiquity of diamond frames over recumbents which prioritise comfortably for example.
I think we have seen that effect lesson over the last decade or so (e.g. belt drives for example). Ebikes help as they have very different markets, need different properties and have by definition no need to overlap with UCI compliance at all.
Of course its quite hard to unpick the other factors that have led the market to be cater so strongly to leisure market over the utility market but the UCI I think is up there in setting a cultural standard for what a bike is at the cost to alternatives.
The thing is, recumbents are available. Both for casual riding and for racing. I see them around from time to time. And other frame designs have been tried, too. Look at triathlon bikes, where designs have been tried removing the top tube, the seat tube, the seat stay, the down tube, or some combination of those.
I don’t think recumbents have taken off because they actually aren’t very good to ride. They’re great if your goal is to go as fast as possible with as little energy, on relatively flat and straight courses. But they’re awkward going up hill, don’t go around corners as nicely, are a little more difficult in situations where you need to stop-start a lot, and are less visible in traffic. Recumbent trikes might help with that stop-start issue, but probably make it worse with steering through narrow entries and around tight corners.
The variant TT designs just don’t provide any real advantage for normal people, and even the supposed advantage to professional triathletes is marginal at best.
The diamond frame just happens to be a really, really good design. That’s why variants on it are used on everything from TT bikes (well, the majority of them) to the Dutch step-through bike.
@Zagorath @zerakith recumbent trikes are excellent at low speed manouvers, which can be a boon in busy areas where any bike must be walked. I only once tried to corner too fast and that was faster than I corner on a bike anyway.
Hills are fine, in theory better than a bike as you have something to push against. So if you are light and have poor arm strength you can put out more power in a recumbent. Or just someone with legs stronger than that
They are trash at going through narrow spaces.
Being available in a niche market isn’t the same as being affordable because its a mass product. There’s more use-cases then you outline: they are particularly good for those with certain types of disabilities. You are right that mixing with traffic is another key reason why they arent as popular. There’s a reason you see them most commonly in areas with decent segregated infrastructure. Personally I have a DF for some of the reasons you outline. My point wasn’t all about the frame though that was just an example, its also true of the focus at component level where R&D has not prioritised low-cost low-maintance options because the high-cost high-performance market was more lucrative and that stems from in part from the direction performance cycling took.
I dig the blotter art influence on that.
Wow this mural is incredible
Happy belated bicycle day
They have some pretty cool bike highways in Puebla
